Piston Seals

The offer of standard rod seals (produced by injection molding) includes 16 more types. You can find their overview in the catalog below. For detailed technical information on individual types (maximum operating pressure, temperature, speed, etc.), please contact us.

The installation space for piston seals typically takes the form of a wider groove. For so-called omega seals, which combine PTFE+Bronze and NBR, the installation takes the form of a deep and narrow groove.

When designing and creating installation spaces for piston seals, it is necessary to follow recommendations that are generally valid for the construction of sealing elements. In particular, it is necessary to maintain the surface roughness of the sealing groove at Ra ≤ 1.6μm and Rt ≤ 6.3 μm and to check before assembly that the sealing groove is cleaned of possible impurities and that there are no sharp edges, burrs, or other surface imperfections in the given place. It is also necessary to maintain the recommended size of the lead-in edge in the cylinder. Otherwise, the sealing lips may be damaged during assembly.

Thanks to our technological equipment, we can manufacture sealing elements (and more) up to an outer diameter of 505 mm. However, in cooperation with verified international partners, we can also offer seals of significantly larger diameters.

We maintain a large stock of basic materials, from the smallest sizes up to diameters exceeding 500 mm. This enables us to respond flexibly to urgent requests. We typically manufacture seals within a few days, but in case of need (e.g., breakdowns, urgent repairs of hydraulic equipment), we can produce seals virtually on demand.

We manufacture sealing elements starting from a single piece. However, thanks to the automation elements we utilize in production, we can also efficiently produce large series. We use a wide range of machining tools specifically developed for manufacturing seals and machining specific sealing materials. This enables us to produce many non-standard profiles and shapes, or to perform shape and dimensional modifications of standard profiles.