Sealing cords

Sealing cords are used as contact compression seals in static and dynamic applications. Their task is to prevent the penetration of the sealing medium. They are used in many applications in the engineering, food, chemical industries, etc.

We offer a wide range of packing cords for static and dynamic applications.

Possibility to produce custom knitted cord according to your requirements.

Static applications – static insulation seals

REONPACK B000 | up to 80°C | for pH 5-10

REONPACK PB 000 is a high quality knitted seal made of cotton yarn without impregnation.

Colour

Beige

Use

REONPACK B 000 is designed for static use in general industry for lids, doors, hatches, etc. The sealing cord is recommended to be used for sealing dry air and inert gases.

Dimensions

REONPACK B 000 seals are available in round, square and rectangular cross-sections in a range of sizes from 4 mm to 70 mm.

REONPACK K000 | up to 120°C | for pH 6-9

REONPACK K000 is a high quality knitted gasket made of hemp yarn, without reinforcement and without impregnation.

Colour

Grey

Use

REONPACK K000 seals are designed for static applications such as valves, spindles, flanges, lids, etc. This gasket is recommended for sealing dry air, inert gases.

Dimensions

REONPACK K000 seals are produced in square cross-sections in a range of sizes from 12 mm to 50 mm.

REONPACK TS600 | up to 600°C | for pH 3-12

The REONPACK TS600 is a circular, spun gasket made of ECO glass yarn.

Colour

White

Use

The REONPACK TS600 seal is designed as a static seal for dry air and inert gases for air distribution systems, for sealing boilers, furnaces and hatches.

Dimensions

REONPACK TS600 sealing cord is produced in round cross-sections from 3 mm to 30 mm.

REONPACK HS600 | up to 600°C | for pH 3-12

REONPACK HS600 is a knitted hose, made of glass yarn ECO

HS 600 G - colour-coded gasket (black)

HS 600 P - sealing with double-sided adhesive tape

HS 600 G P - colour black, taped on both sides with adhesive tape.

Colour

White

Use

The REONPACK HS600 seal is designed as a static seal, or as a hose braid, for dry air and inert gases for air distribution systems, for sealing boilers, furnaces and hatches. Dimensions The REONPACK HS600 gasket is produced in a circular cross-section in a range of sizes from 4 mm to 50 mm. The REONPACK HS600 gasket is produced in a circular cross-section in a range of sizes from 4 mm to 50 mm.

REONPACK PS600 | up to 600°C | for pH 3-12

REONPACK PS600 is a knitted insulating seal made of ECO glass yarn. The sealing cord is electrically non-conductive.

Colour

White

Use

REONPACK PS600 is designed as a static seal for dry air and inert gases for air distribution systems, for sealing boilers, furnaces and hatches, doors, lids, etc.

Dimensions

REONPACK PS600 seals are available in square, round or rectangular cross-sections in a range of sizes from 4 mm to 80 mm.

REONPACK NS600 | up to 600°C | for pH 3-12

REONPACK NS600 is a knitted insulating seal made of ECO glass yarn.

The glass yarn is reinforced with stainless steel wire to increase the seal's resistance to mechanical stress.

Colour

White

Use

REONPACK NS600 is designed as a static seal for dry air and inert gases for air distribution systems, for sealing boilers and furnaces, hatches, doors and lids.

Dimensions

REONPACK NS600 seals are available in square, round or rectangular cross-sections from 10 mm to 80 mm.

REONPACK TS610 | up to 750°C | for pH 3-12

REONPACK TS610 is a knitted thermal insulation seal made of high temperature HT - glass fibre.

The seal is a full replacement for asbestos materials.

Colour

White

Use

REONPACK TS610 is a flexible and elastic seal with high heat resistance, designed for static applications such as flanges, lids, pipe insulation, expansion joint seals, high temperature equipment joints, doors and hatches. The seal is suitable for dry air and inert gases. Not recommended for sealing hydrofluoric acid, phosphoric acid and concentrated hydroxides.

Dimensions

REONPAKC TS610 seals are available in square, round or rectangular cross-sections in a range of sizes from 4 mm to 80 mm.

REONPACK NS750 | up to 750°C | for pH 3-12

REONPACK NS600 is a knitted heat-insulating seal made of high-temperature HT - glass fibre, reinforced with stainless steel wire.

The seal is a full replacement for asbestos materials.

Colour

White

Use

REONPACK NS750 is a flexible and elastic seal with high heat resistance, designed for static applications such as flanges, lids, pipe insulation, expansion joint seals, high temperature equipment joints, doors and hatches. The seal is suitable for dry air and inert gases. Not recommended for sealing hydrofluoric acid, phosphoric acid and concentrated hydroxides.

Dimensions

REONPACK NS750 is available in square, round or rectangular cross-sections in a range of dimensions from 4 mm to 80 mm.

REONPACK MS750 | up to 750°C | for pH 3-12

REONPACK MS750 is a knitted heat-insulating seal made of high temperature HT - glass fibre, reinforced with brass wire.

The seal is a full replacement for asbestos materials.

Colour

White

Use

REONPACK MS750 is a flexible and elastic seal with high heat resistance, designed for static applications such as flanges, lids, pipe insulation, expansion joint seals, high temperature equipment joints, doors and hatches. The seal is suitable for dry air and inert gases. Not recommended for sealing hydrofluoric acid, phosphoric acid and concentrated hydroxides.

Dimensions

REONPACK MS750 gaskets are available in square, round or rectangular cross-sections in a range of sizes from 4 mm to 80 mm.

REONPACK ES600 | up to 600°C | for pH 3-12

REONPACK ES600 is a soft knitted gasket made of ECO glass yarn. The gasket is softer, more flexible and more formable compared to PS600.

ES600 G - colour coded gasket (black)

ES600 P - sealing with double-sided adhesive tape

ES600 G P - colour black, taped on both sides with adhesive tape.

Colour

White

Use

REONPACK ES600 is designed as a static seal for dry air and inert gases for air distribution systems, for sealing boilers, furnaces and hatches, doors, lids, etc.

Dimensions

ES600 gaskets are available in square, round or rectangular cross-sections in a range of sizes from 4 mm to 80 mm.

REONPACK ES590 | up to 600°C | for pH 3-12

REONPACK ES590 is a special gasket made of fibreglass strands, which are fixed with a thin braid of glass yarn. E glass is used as the basic raw material for the production of the seals.

Colour

White

Use

REONPACK ES590 is designed as a static seal for applications where softness, maximum ductility, conformability and volume are required. Not suitable for environments subject to mechanical stress.

Dimensions

The REONPACK ES590 gasket is produced in a circular cross-section in the size range 6 - 25 mm.

REONPACK KS600 | up to 600°C | for pH 3-12

REONPACK KS600 is a knitted seal of combined construction, where the core of ceramic sibral material is braided with ECO glass yarn.

Colour

White

Use

The REONPACK KS600 seal is designed for static applications where adaptability to the sealed profile is required. It is used for thermal insulation, air ducts, sealing of boilers, furnaces and hatches. Resists most chemicals including solvents. The softness guarantees good sealing properties at relatively low loads.

Dimensions

REONPACK KS600 seals are available in square, round or rectangular cross-sections in a range of sizes from 10 mm to 70 mm.

REONPACK NS590 | up to 600°C | for pH 3-12

REONPACK NS590 is a knitted gasket of multi-lane construction, where the glass-sibral core is braided with ECO glass yarn.

The glass yarn is reinforced with iconel stainless steel wire to increase the seal's resistance to mechanical stress.

Colour

White

Use

REONPACK NS590 is designed for static use in brickworks for sealing transport trolleys for dry air and inert gases.

Dimensions

NS590 gaskets are available in square or rectangular cross-sections in a range of sizes from 30 mm to 70 mm.

REONPACK MS650 | up to 650°C | for pH 3-12

REONPACK MS650 is a knitted gasket of multi-lane construction, where the glass-sibral core is braided with ECO glass yarn.

The glass yarn is reinforced with brass wire to increase the seal's resistance to mechanical stress.

Colour

White

Use

REONPACK MS650 is designed for static use in brickworks for sealing transport trolleys for dry air and inert gas sealing.

Dimensions

MS650 gaskets are available in square or rectangular cross-sections in a range of sizes from 30 mm to 70 mm.

REONPACK WS600 | up to 650°C | for pH 3-12

REONPACK WS600 is a high quality thermal insulation knitted seal of combined construction, where the SUPERWOOL core is braided with ECO glass yarn.

Colour

White

Use

The REONPACK WS600 seal is designed for static applications where adaptability to the sealed profile is required. It is used for thermal insulation, air ducts, sealing of boilers, furnaces and hatches. Resists most chemicals including solvents. The softness guarantees good sealing properties at relatively low loads.

Dimensions

REONPACK WS600 gaskets are available in square, round or rectangular cross-sections in a range of sizes from 10 mm to 50 mm.

REONPACK GS600 | up to 650°C | for pH 3-12

REONPACK GS600 is a knitted seal of combined construction, where the SUPERWOOL core is braided with ECO glass yarn with graphite surface treatment.

Colour

Black

Use

The REONPACK GS600 seal is designed for static applications where adaptability to the sealed profile is required. It is used for thermal insulation, air ducts, sealing of boilers, furnaces and hatches. Resists most chemicals including solvents.

Dimensions

REONPACK GS600 gaskets are available in square, round or rectangular cross-sections in a range of sizes from 10 mm to 50 mm. The softness guarantees good sealing properties at relatively low loads.

REONPACK NS1000 | up to 1000°C

REONPACK NS1000 is a special sealing gasket, made of special combed high temperature glass yarn, which is reinforced with stainless steel wire.

Colour

Light Green

Use

The REONPACK NS1000 sealant is designed for high temperature insulation with good resistance to most chemicals (except hydrofluoric acids, phosphorus-based products and their concentrates). It is suitable for liquid aluminium and zinc.

Dimensions

The NS1000 gasket is available in square, round or rectangular cross-sections in a range of sizes from 10 mm to 70 mm.

REONPACK NSW1000 | up to 1000°C

REONPACK NSW1000 is a special sealing gasket, made of special combed, high temperature glass yarn, which is reinforced with stainless steel wire. The core of the padding contains high temperature Super Wool material.

Colour

Light Green

Use

The REONPACK NSW1000 gasket is designed for high temperature insulation with good resistance to most chemicals (except hydrofluoric acid, phosphorus-based products and their concentrates). It is suitable for liquid aluminium and zinc.

Dimensions

The NSW1000 gasket is available in square, round or rectangular cross-sections in a range of sizes from 10 mm to 70 mm.

REONPACK ST600 | up to 600°C | for pH 3-12

REONPACK ST 600 is a particularly soft version packing cords, designed for static use. Textured glass yarn is used for production.

Colour

White

Use

The REONPACK ST 600 seal is designed as a static seal for the requirement of adaptability to the sealed profile and low compression. It is used for thermal insulation, air ducts, sealing of boilers, furnaces and hatches. Resists most chemicals including solvents. The softness and natural compressibility guarantee good sealing properties at relatively low loads. The seal is recommended for fireplaces and stoves.

Dimensions

The ST 600 sealing cord is produced in a circular cross-section in a range of sizes from 3 mm to 14 mm.

REONPACK STT600 | up to 600°C | for pH 3-12

REONPACK STT 600 is a particularly soft seal for static use made of textured glass yarn. The sealing cord is treated against discoloration during use.

Colour

Black

Use

The REONPACK STT 600 seal is designed as a static seal for the requirement of adaptability to the sealed profile and low compression. It is used for thermal insulation, air ducts, sealing of boilers, furnaces and hatches. Resists most chemicals including solvents. The softness and natural compressibility guarantee good sealing properties at relatively low loads. The seal is recommended for fireplaces and stoves.

Dimensions

STT 600 sealing cord is produced in round cross-section in a range of sizes from 3 mm to 14 mm.

REONPACK KST1200 | up to 1200°C | melting point 1760°C

REONPACK KST 1200 is a knitted hose made of ceramic yarn, reinforced with inconel wire.

Colour

White

Use

The REONPACK KST 1200 seal is designed as a static seal, or as a hose braid, for dry air and inert gases for air distribution systems, for sealing boilers, furnaces and hatches.

Dimensions

The KST 1200 gasket is manufactured in a circular cross-section in a range of sizes from 4 mm to 50 mm.

REONPACK HK800 | up to 800°C | melting point 1760°C

REONPACK HK 800 is a knitted hose made of ceramic yarn, reinforced with glass yarn.

Colour

White

Use

The REONPACK HK800 seal is designed as a static seal, or as a hose braid, for dry air and inert gases for air distribution systems, for sealing boilers, furnaces and hatches.

Dimensions

REONPACK HK 800 is produced in circular cross-sections in a range of dimensions from 4 mm to 50 mm.

REONPACK DK1200 | up to 1200°C | melting point 1760°C

REONPACK DK 1200 is a ceramic twisted packing. The ceramic yarn is reinforced with inconel wire.

Colour

White

Use

The REONPACK DK 1200 sealing gasket is designed for static sealing of boilers, boilers, ingot moulds, hatches, etc. The gasket is suitable for high temperature insulation applications with good resistance to most chemicals (except hydrofluoric acid, phosphorus based products and their concentrates). It is suitable for liquid aluminium and zinc.

Dimensions

The REONPACK DK 1200 sealing gasket is manufactured in a circular cross-section in a range of sizes from 4 mm to 60 mm.

REONPACK KS800 | up to 800°C | melting point 1760°C

REONPACK KS 800 is a ceramic twisted packing. The ceramic yarn is reinforced with glass fibre.

Colour

White

Use

REONPACK KS 800 is designed for static sealing of boilers, boilers, ingot moulds, hatches, etc. The gasket is suitable for high temperature insulation applications with good resistance to most chemicals (except hydrofluoric acid, phosphorus based products and their concentrates). It is suitable for liquid aluminium and zinc.

Dimensions

The REONPACK KS 800 sealing gasket is produced in a circular cross-section in a range of sizes from 4 mm to 60 mm.

REONPACK KP1200 | up to 1200°C | melting point 1760°C

REONPACK KP 1200 is a special sealing packing where the core of ceramic material is braided with ceramic yarn, reinforced with inconel wire.

The packing is knitted with a two-strand construction.

Colour

White

Use

REONPACK KP 1200 is designed for static sealing of boilers, boilers, ingot moulds, hatches, etc. The gasket is suitable for high temperature insulation applications with good resistance to most chemicals (except hydrofluoric acid, phosphorus based products and their concentrates). Suitable for liquid aluminium and zinc

Dimensions

The KP 1200 sealing packing is available in round, square or rectangular cross-sections in a range of sizes from 4 mm to 70 mm.

REONPACK KKS800 | up to 800°C | melting point 1760°C

REONPACK KKS 800 is a special sealing gasket where the core of ceramic material is braided with ceramic yarn reinforced with glass fibre.

The packing is knitted with a two-strand construction.

Colour

White

Use

REONPACK KKS 1200 is designed for static sealing of boilers, boilers, ingot moulds, hatches, etc. The gasket is suitable for high temperature insulation applications with good resistance to most chemicals (except hydrofluoric acid, phosphorus based products and their concentrates). It is suitable for liquid aluminium and zinc.

Dimensions

The KKS 800 sealing packing is available in round, square or rectangular cross-sections in a range of sizes from 4 mm to 70 mm.

REONPACK KS1200 | up to 1200°C | melting point 1760°C

REONPACK KS 1200 is a special sealing packing where the core made of ceramic material SIBRAL is braided with ceramic yarn reinforced with inconel wire.

The packing can be braided in one or more layers.

Colour

White

Use

REONPACK KS 1200 is designed for static sealing of boilers, boilers, ingot moulds, hatches, etc. The gasket is suitable for high temperature insulation applications with good resistance to most chemicals (except hydrofluoric acid, phosphorus based products and their concentrates). It is suitable for applications where softness of the packing is a requirement.

Dimensions

The KS 1200 sealing packing is available in round or square cross-sections in a range of sizes from 10 mm to 70 mm.

REONPACK KKS790 | up to 800°C | melting point 1760°C

REONPACK KSS 790 is a special sealing gasket where the core of the ceramic material Sibral is braided with ceramic yarn, reinforced with glass yarn.

The packing can be braided in one or more layers.

Colour

White

Use

REONPACK KSS 790 is designed for sealing boilers, boilers, hatches, etc. The gasket is suitable for high temperature insulation applications with good resistance to most chemicals (except hydrofluoric acid, phosphorus based products and their concentrates). It is suitable for applications where softness of the packing is a requirement.

Dimensions

The KSS 790 sealing packing is available in round, square or rectangular cross-sections in a range of sizes from 10 mm to 70 mm.

REONPACK AS260 | -85 to 260°C | for pH 2-12

REONPACK AS 260 is a cord knitted from high tenacity aramid yarn.

Colour

Yellow

Use

The REONPACK AS 260 sealing gasket is designed for static seals. This gasket provides good chemical resistance and is therefore recommended for sealing a wide range of chemicals including organic solvents, oils, steam and most alkaline and acidic media.

Dimensions

The REONPACK AS260 sealant is produced in square cross-section in a range of sizes from 4 mm to 35 mm

REONPACK SCH700 | -260 to 700°C | holding temperature 1250°C | for pH 0-14

REONPACK SCH 700 is a static seal made of a material that resists high temperatures, has exceptional abrasion resistance and exceptional chemical resistance.

The gasket has a smooth surface, is easy to shape and keeps the chosen shape.

Colour

Brown-green

Use

REONPACK SCH 700 is a full-value replacement for asbestos and ceramic gaskets that are exposed to high temperatures and mechanical stresses in aggressive environments, especially for these applications: - in metallurgy in pig iron processing - for sealing moulds during metal casting - in the production of heat and electricity, as insulation for boilers and their accessories - in the manufacture of industrial boilers, furnaces, kilns and dryers - in the manufacture of glass, brick and ceramic products - for braiding hoses and wires exposed to high temperatures

Dimensions

SCH 700 is available in round or square cross-sections in a range of sizes from 8 mm to 80 mm.

Dynamic applications – knitted seals for pumps, valves

REONPACK BL017 | up to 80°C | for pH 6-9

Max. recommended pressure: rotary 10 bar / reciprocating 10 bar / static 60 bar

Perimeter speed 10 m/sec

REONPACK BL 017 is a high quality knitted seal made of cotton yarn, which is impregnated with tallow impregnation.

Colour

Beige

Use

The REONPACK BL 017 seal is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This seal is recommended for sealing dry air, inert gases, industrial water, brine, neutral salt solutions, water vapor, organic solvents, drinking water, edible fats, oils, wine, fruit juices, in the food industry, for breweries, distilleries, etc. (according to ON 02 9151)

Dimensions

REONPACK BL 017 seals are available in square and circular cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK BL016 | up to 100°C | for pH 6-9

Max. recommended pressure: rotary 10 bar / reciprocating 10 bar / static 60 bar

Peripheral speed 5 m/sec

REONPACK BP 016 is a high quality knitted gasket made of cotton yarn impregnated with paraffin impregnation.

Colour

Red

Use

The REONPACK BP 016 seal is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This gasket is recommended for sealing dry air, inert gases, industrial water, brine, neutral salt solutions, water vapor, organic solvents, etc.

Dimensions

REONPACK BP 016 gaskets are produced in square and round cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK BG015 | up to 80°C | for pH 6-9

Max. recommended pressure: rotary 10 bar / reciprocating 10 bar / static 60 bar

Perimeter speed 10 m/sec

REONPACK BG 015 is a high quality knitted gasket made of cotton yarn impregnated with mineral oil, wax and graphite.

Colour

Black

Use

The REONPACK BG 015 seal is designed for dynamic applications such as rotary pumps, valves, piston rods, spindles, etc. This seal is recommended for pumps in general industry, in mines, for pumps for dirty water, etc.

Dimensions

REONPACK BG 015 gaskets are available in square, round or rectangular cross-sections in a range of sizes from 4 mm to 50 mm

REONPACK BTG014 | up to 100°C | for pH 6-9

Max. recommended pressure: rotary 10 bar / reciprocating 10 bar / static 60 bar

Perimeter speed 10 m/sec

REONPACK BTG 014 is a high quality knitted gasket made of cotton yarn, impregnated with Teflon dispersion and graphite.

Colour

Black

Use

The REONPACK BTG 014 seal is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This seal is recommended for sealing common chemicals, oils, industrial water, brine, neutral salt solutions, organic solvents, ammonia, asphaltenes, etc.

Dimensions

REONPACK BTG 014 gaskets are produced in square and round cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK BT013 | up to 120°C | for pH 5-10

Max. recommended pressure: rotary 10 bar / reciprocating 15 bar / static 60 bar

Perimeter speed 10 m/sec

REONPACK BT 013 is a high quality knitted gasket made of cotton yarn impregnated with Teflon.

Colour

White

Use

The REONPACK BT 013 seal is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This seal is recommended for sealing drinking water, edible fats, oils, fruit juices, in the food industry, pharmaceutical industry, breweries, distilleries, for sealing industrial water, brine, neutral salt solutions, organic solvents, ammonia, asphaltenes, etc.

Dimensions

REONPACK BT 013 seals are produced in square and round cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK LK012 | up to 80°C | for pH 6-9

Max. recommended pressure: rotary 10 bar / reciprocating 15 bar / static 50 bar

Peripheral speed 8 m/sec

REONPACK LK 012 is a high quality knitted seal made of hemp yarn, which is impregnated with tallow impregnation.

Colour

Beige

Use

The REONPACK LK 012 seal is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This gasket is recommended for sealing dry air, inert gases, industrial water, brine, neutral solutions of salts, water vapour and organic solvents, drinking water, edible fats and oils, wine, fruit juices, in the food industry, for breweries and distilleries, etc.

Dimensions

PREONPACK LK 012 seals are produced in square cross-section in a range of sizes from 4 mm to 50 mm.

REONPACK LKP011 | up to 80°C | for pH 6-9

Max. recommended pressure: 60 bar

Peripheral speed 4 m/sec

REONPACK LKP 011 is a high quality knitted seal made of hemp yarn, which is impregnated with paraffin impregnation.

Colour

Red

Use

The REONPACK LKP 011 seal is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This gasket is recommended for sealing dry air, inert gases, industrial water, brine, neutral salt solutions, water vapor and organic solvents, etc.

Dimensions

REONPACK LKP 011 gaskets are produced in square cross-section in a range of sizes from 4 mm to 50 mm.

REONPACK KG010 | to -50°C to 120°C | for pH 6-9

Max. recommended pressure: rotary 10 bar / reciprocating 20 bar / static 50 bar

Peripheral speed 5 m/sec

REONPACK KG 010 is a high quality knitted gasket made of hemp yarn impregnated with oil and graphite.

Colour

Black

Use

REONPACK KG 010 seals are designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This seal is recommended for sealing industrial water, brine, neutral salt solutions, water vapour and organic solvents etc.

Dimensions

REONPACK KG 010 gaskets are produced in square cross-section in a range of sizes from 4 mm to 50 mm.

REONPACK KG022 | from -200°C to +450°C (steam to 650°C) | for pH 0-14

Max. recommended pressure: rotary 30 bar / reciprocating 200 bar / valves 300 bar

Peripheral speed 20 m/sec

REONPACK KG 022 is a high quality knitted gasket made of pure carbon fibre, where each fibre is impregnated with PTFE. The gasket is treated with graphite on the surface and lubricated with silicone oil.

Colour

Black

Use

The REONPACK KG 022 seal is characterized by good adaptability, good heat distribution and a very low coefficient of friction. The seals are designed for valves, mixers, boilers, for chemical, petrochemical and pharmaceutical industries, for sealing water, steam, chemicals, hot gases, solvents, etc.

Dimensions

REONPACK KG 022 gaskets are produced in square cross-section in a range of sizes from 4 mm to 35 mm.

REONPACK KGI021 | from -240°C to +450°C (steam to 650°C) | for pH 0-14

Max. recommended pressure: 300 bar

Peripheral speed 2 m/sec

REONPACK KGI 021 is a high quality knitted seal made of pure carbon fibre reinforced with stainless steel wire, where each fibre is impregnated with PTFE. The gasket is treated with graphite on the surface and lubricated with silicone oil.

Colour

Black

Use

REONPACK KGI 021 is characterized by good adaptability and good heat distribution. Suitable for the first and last rings in a set with PG 306 graphite rings. The seal is designed for static seals and valve seals for the chemical, petrochemical, cryogenic and power plant industries for high temperature inert media in non-oxygenated environments.

Dimensions

REONPACK KGI 021 gaskets are produced in square cross-section in a range of sizes from 4 mm to 35 mm.

REONPACK GG020 | from -200°C to +450°C (steam to 650°C) | for pH 0-14

Max. recommended pressure: rotary 30 bar / reciprocating 100 bar / valves 300 bar

Peripheral speed 20 m/sec

REONPACK GG 020 is a flexible gasket made of high quality expanded graphite yarn. Carbon content is 95%, chloride content is less than 50 ppm. It is impregnated with graphite and can be impregnated with a corrosion inhibitor to increase the sealing ability at higher temperatures.

Colour

Black

Use

The REONPACK GG 020 seal is designed for sealing pumps. The adaptability and natural compressibility of graphite guarantees good sealing properties at relatively low loads. The material is suitable for sealing high pressures and high temperature ranges. Permanent PG 305 is characterized by a very low coefficient of friction, excellent resistance to chemicals and is therefore suitable for general use in the paper industry, petrochemical, chemical industry, power plants, steam sealing, mixers, kneaders, etc.

Dimensions

REONPACK GG 020 gaskets are produced in square cross-section in a range of sizes from 4 mm to 35 mm.

REONPACK GI019 | from -200°C to +480°C (steam to 650°C) | for pH 0-14

Max. recommended pressure: return 200 bar / valves 300 bar

Peripheral speed 2 m/sec

REONPACK GI 019 is a flexible gasket made of high quality expanded graphite yarn reinforced with inconel wire. To increase the sealing ability at higher temperatures, the seal is impregnated with graphite and can be impregnated with a corrosion inhibitor.

Colour

Black

Use

The REONPACK GI 019 seal is designed for sealing valves with linear and rotary shaft movement at low compression due to its natural adaptability and lubricating ability. REONPACK GI 019 is characterized by a very low coefficient of friction, excellent resistance to chemicals and high temperatures and pressures and is therefore suitable for general use in the paper industry, petrochemical and chemical industries, in power plants for steam sealing, for mixers, kneaders, etc.

Dimensions

REONPACK GI 019 gaskets are produced in square cross-section in a range of sizes from 4 mm to 35 mm.

REONPACK GK018 | from -250°C to +450°C (steam to 650°C) | for pH 0-14

Max. recommended pressure: rotary 30 bar / reciprocating 200 bar / valves 300 bar

Peripheral speed 20 m/sec

REONPACK GK 018 is made of pure expanded graphite, the corners of the seal are reinforced with high quality carbon fibre. To improve the sliding properties, the seal is impregnated with PTFE impregnated with graphite.

Colour

Black

Use

REONPACK GK 018 is designed for rotary and reciprocating applications. It is also recommended for valve sealing and as a static seal. The natural compressibility of graphite ensures good sealing properties at relatively low loads. Carbon yarn increases the strength of the packing when sealing high pressures and temperatures. The GK 018 seal is characterized by excellent resistance to chemicals (except strong oxidizing agents) and is therefore suitable for steam, water, oil, solvents, acids and most chemicals in the petrochemical, chemical, cryogenic, heating and power plant industries.

Dimensions

REONPACK GK 018 gaskets are produced in square cross-section in a range of sizes from 8 mm to 35 mm.

REONPACK 3110 | from -240°C to 450°C (steam 650°C, inert gases 1000°C) | for pH 0-14

REONPACK 3110 is a universal static seal for metallic and non-metallic flanges, supplied in a coil yardage. This sealing material is made in the form of a strip of high purity expanded graphite. The tape is well flexible, malleable and strong, so it is suitable for different sizes and shapes of flanges. It is supplied with a self-adhesive layer for ease of installation.

REONPACK 3110 / I is a sealing material reinforced with inconel wire.

Colour

Black

Use

REONPACK 3110 is used as a flange seal especially for large diameters. It is characterized by excellent heat resistance, resistance to chemicals (except strong oxidants) and therefore suitable for most media, steam, superheated steam, condensate, waste water, gases, mineral and synthetic oils, hydrocarbons, fuels, heat exchangers, autoclaves, reactors, hatches, lids, covers, etc. Note: When applying seals to inert or reducing environments, the possibility of attack on the seal from the external environment must be taken into account. Do not use with strong oxidizing agents !
Rozsah pH0-14
Pracovní teplotaod -240°C do 450°C
Max. teplota pro párudo 650°C
Max. teplota pro intertní plynydo 1 000°C
Maximální tlak300 bar
Měrná hmotnost1,0 g / cm³
Obsah grafitumin. 98%
Obsah výluhu chloridových iontů<50 ppm
Obsah výluhu fluoridových iontů<50 ppm
Obsah síry<800 ppm

Dimensions

10 x 4 ; 15 x 4 ; 20 x 4 ; 25 x 3 ; 25 x 6 ; 30 x 4,5 ; 40 x 5 ; 50 x 6 mm

REONPACK SG009 | up to +180°C | for pH 3-12

Max. recommended pressure: rotary 10 bar / reciprocating 50 bar / valves 200 bar

Peripheral speed 8 m/sec

REONPACK SG 009 is a knitted seal made of ECO glass yarn, impregnated with graphite and impregnated with mineral oil and wax.

Colour

Black

Use

REONPACK SG 009 is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This seal is suitable for chemicals including oils, solvents, mild acids, alkalis, in the petrochemical and chemical industries, for sealing industrial water, brine, neutral salt solutions, water vapour, etc. Please note: consultation is required for static applications

Dimensions

REONPACK SG 009 gaskets are produced in round or square cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK SGT008 | from -200°C to +290°C | for pH 3-12

Max. recommended pressure: rotary 50 bar / reciprocating 80 bar / valves 200 bar

Perimeter speed 10 m/sec

REONPACK SGT 008 is a knitted seal made of glass yarn impregnated with graphite-teflon dispersion.

Colour

Black

Use

REONPACK SGT 008 is designed for dynamic applications such as pumps, valves, piston rods, spindles and is suitable for sealing common chemicals, mild acids, alkalis, organic solvents, oils, etc.

Dimensions

REONPACK SGT 008 gaskets are available in round, square or rectangular cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK ST007 | from -50°C to +260°C | for pH 3-12

Max. recommended pressure: 140 bar

Peripheral speed 2 m/sec

REONPACK ST 007 is a seal knitted from glass yarn ECO impregnated with Teflon

Colour

White

Use

The REONPACK ST 007 gasket is designed for valves. The seals are suitable for chemicals including oils, solvents, mild acids, water, gases in the petrochemical and chemical industries, food and pharmaceutical industries, paint production, breweries, etc.

Dimensions

REONPACK ST 007 is produced in square or circular cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK STL006 | from -50°C to +280°C | for pH 2-12

Max. recommended pressure: rotary 20 bar / reciprocating 40 bar / valves 60 bar

Perimeter speed 10 m/sec

REONPACK STL 006 is a seal knitted from glass yarn ECO impregnated with Teflon and lubricated with silicone oil.

Colour

White

Use

The REONPACK STL 006 seal is designed for dynamic applications such as rotary pumps, piston rods, etc. The seals are suitable for chemicals including oils, solvents, mild acids, water, gases in the petrochemical and chemical industries, paint production, breweries, power plants, etc.

Dimensions

REONPACK STL 006 is produced in square or circular cross-sections in a range of sizes from 4 mm to 50 mm.

REONPACK SGT005 | up to +480°C | for pH 3-12

Max. recommended pressure: rotary 50 bar / reciprocating 80 bar / valves 150 bar

Perimeter speed 15 m/sec

REONPACK SGT 005 is a seal knitted from glass yarn impregnated with graphite-teflon dispersion and impregnated with mineral oil.

Colour

Black

Use

REONPACK SGT 005 is designed for dynamic applications such as rotary pumps, piston rods, spindles, etc. The seal is suitable for chemicals including oils, solvents, mild acids, alkalis, in the petrochemical and chemical industries, for industrial water, steam.

Dimensions

SGT 005 gaskets are available in round or square cross-sections in a range of sizes from 4 mm to 80 mm.

REONPACK AT034 | from -100°C to +180°C | for pH 3-12

Max. recommended pressure: rotary 50 bar / reciprocating 100 bar / valves 200 bar

Peripheral speed 20 m/sec

REONPACK AT 034 is a special sealing gasket knitted in a multi-strand construction, made of continuous high strength PTFE impregnated aramid yarn. The yarn is lubricated with silicone oil.

Colour

Yellow

Use

The REONPACK AT 034 sealing packing is designed for sealing valves and pumps. This seal provides good chemical resistance and is therefore recommended for sealing a wide range of chemicals including organic solvents, fuels, oils, steam and most alkaline and acidic media. REONPACK AT 034 is a durable seal and is suitable for sealing abrasive sludge and wastewater.

Dimensions

The AT 034 sealing gasket is produced in square cross-section in a range of sizes from 4 mm to 35 mm.

REONPACK ATG033 | from -100°C to +400°C | for pH 2-12

Max. recommended pressure: rotary 50 bar / reciprocating 50 bar / valves 100 bar

Perimeter speed 15 m/sec

REONPACK AGT 033 is a sealing gasket knitted with a multi-strand construction, made of high strength aramid yarn, impregnated with Teflon-graphite dispersion and lubricated with silicone oil and graphite.

Colour

Black

Use

The REONPACK AGT 033 sealing packing is designed for sealing valves and pumps. This gasket provides good chemical resistance and is therefore recommended for sealing a wide range of chemicals including solvents, oils, steam and most alkaline and acidic media.

Dimensions

The AGT 033 sealing gasket is produced in square cross-section in a range of sizes from 4 mm to 35 mm. REONPACK AGT 033 is suitable for sealing abrasive sludge and wastewater.

REONPACK ATG032 | from -100°C to +280°C | for pH 2-12

Max. recommended pressure: 10 MPa

Peripheral speed 2 m/sec

REONPACK AT 032 is a sealing gasket knitted with a multi-strand construction, made of high strength aramid yarn impregnated with Teflon dispersion.

Colour

Yellow/white

Use

REONPACK AT 032 sealing packing is designed for sealing valves of rotary and piston pumps, mixers, agitators. This gasket provides good chemical resistance and is therefore recommended for sealing a wide range of chemicals including solvents, oils, steam and most alkaline and acidic media in sugar mills, paper mills, power plants. REONPACK AT 032 is suitable for sealing abrasive sludge and wastewater.

Dimensions

The AT 032 sealing gasket is produced in square cross-section in a range of sizes from 4 mm to 35 mm.

REONPACK AT031 | from -100°C to +280°C | for pH 2-12

Max. recommended pressure: rotary 2.5 MPa / reciprocating 10 MPa / valves 0 MPa

Peripheral speed rotary 20 m/sec / reciprocating 1 m/s / valves 1 m/s

REONPACK AT 031 is a knitted cord with multi-strand construction, made of high strength aramid staple yarn, impregnated with Teflon dispersion and lubricated with silicone oil.

Colour

Yellow/white

Use

REONPACK AT 031 sealing cord is designed for sealing valves of rotary and piston pumps, mixers, agitators. This gasket provides good chemical resistance and is therefore recommended for sealing a wide range of chemicals including solvents, oils, steam and most alkaline and acidic media in sugar mills, paper mills, power plants. REONPACK AT 031 is suitable for sealing abrasive sludge and wastewater.

Dimensions

AT 031 sealing cords are produced in square cross-sections in a range of sizes from 4 mm to 35 mm.

REONPACK TT030 | from -200°C to 260°C | for pH 0-14

Max. recommended pressure: rotary 20 bar / reciprocating 150 bar / static 200 bar

Peripheral speed 2 m/sec

REONPACK TT 030 is a soft flexible plugging cord, knitted in a multi-strand construction from pure Teflon yarn impregnated with Teflon dispersion.

Colour

White

Use

The REONPACK TT 030 seal is suitable for use on valves, shafts of reciprocating pumps and static applications for most chemicals, concentrated acids and where contamination-free sealing media is required. With its characteristic softness and adaptability, it does not require high compression to ensure tightness. Due to its high pH resistance range, it is recommended for sealing aggressive chemicals, for use in the food and pharmaceutical industry, chemical and petrochemical industries. The sealing cord is suitable for liquid oxygen.

REONPACK TSI029 | from -200°C to 260°C | for pH 0-14

Max. recommended pressure: rotary 20 bar / reciprocating 30 bar / static 50 bar

Peripheral speed 12 m/sec

REONPACK TSI 029 is a soft flexible seal, knitted in a multi-link construction from pure Teflon yarn, lubricated with silicone oil.

Colour

White

Use

REONPACK TSI 029 seal cords are suitable for use with rotary and reciprocating pumps for most chemicals, concentrated acids and for applications where non-contamination of the sealing medium is required. It is characterized by a very low coefficient of friction, does not disturb the shaft. Due to its high pH resistance range, it is recommended for sealing aggressive chemicals, for use in the food and pharmaceutical industry, chemical and petrochemical industries.

REONPACK TG028 | from -100°C to 280°C | for pH 0-14

Max. recommended pressure: rotary 35 bar / reciprocating 100 bar / static 200 bar

Perimeter speed 15 m/sec

REONPACK TG 028 is a soft flexible seal, knitted with a multi-strand construction made of pure Teflon fibre impregnated with graphite.

Colour

Black

Use

REONPACK TG 028 seals are suitable for rotary and static applications for most chemicals, concentrated acids. It has a low coefficient of friction and excellent heat dissipation. Due to its high pH resistance range, it is recommended for sealing steam, aggressive chemicals, oils, solvents, acids, alkalis for use in chemical and petrochemical industries, paper mills, power plants, etc.

Dimensions

TG 028 gaskets are available in round or square cross-sections in a range of sizes from 4 mm to 35 mm.

REONPACK TG027 | from -200°C to 280°C | for pH 0-14

Max. recommended pressure: rotary 35 bar / reciprocating 100 bar / static 200 bar

Perimeter speed 25 m/sec

REONPACK TG 027 is a knitted gasket of four-track construction, made of a special expanded Teflon fibre impregnated internally with graphite.

Colour

Black

Use

The REONPACK TG 027 seal cord is designed for dynamic applications such as rotary pumps, low pressure valves, piston rods, spindles, etc. The seals are suitable for oils, solvents, acids and alkalis in the petrochemical and chemical industries, breweries, paper and sugar industries. (Same application as GORE-GFO) The seal can be used for all products except molten alkali metals, strong oxidizing agents (oleum, royal ivy and fuming nitric acid).

Dimensions

REONPACK TG 027 gaskets are produced in square cross-section in a range of sizes from 4 mm to 35 mm.

REONPACK TAT026 | from -100°C to 260°C | for pH 0-14

Max. recommended pressure: rotary 35 bar / reciprocating 250 bar / static 250 bar

Peripheral speed 12 m/sec

REONPACK TAT 026 is a sealing packing knitted from Teflon yarn with aramid fibre, impregnated with Teflon dispersion and impregnated with silicone oil.

Colour

Yellow - white

Use

The REONPACK TAT 026 seal cord is designed for sealing pumps. The gasket provides good chemical resistance and is therefore recommended for sealing a wide range of chemicals including organic solvents, fuels, oils, steam and most alkaline and acidic media. TAT 026 is an aramid fibre reinforced Teflon packing to increase wear resistance while reducing the risk of shaft abrasion. The packing is suitable for sealing abrasive sludge and sewage, coarse dirt.

Dimensions

TAT 026 is available in square, round and rectangular cross-sections with dimensions from 4 mm to 35 mm.

REONPACK TGA025 | from -100°C to 280°C | for pH 0-14

Max. recommended pressure: rotary 35 bar / reciprocating 250 bar / static 250 bar

Peripheral speed 20 m/sec

REONPACK TGA 025 is a plugging cord knitted from Teflon yarn with aramid fibre, impregnated with Teflon dispersion with graphite and impregnated with silicone oil

Colour

Black

Use

The REONPACK TGA 025 sealing packing is designed for sealing pumps. The gasket provides good chemical resistance and is therefore recommended for sealing a wide range of chemicals including organic solvents, fuels, oils, steam and most alkaline and acidic media. REONPACK TGA 025 is a Teflon packing reinforced with aramid fibre to increase wear resistance while reducing the risk of shaft abrasion. The packing is suitable for sealing abrasive sludge and sewage, coarse dirt.

Dimensions

The REONPACK TGA 025 sealing gasket is available in square, round and rectangular cross-sections in a range of sizes from 4 mm to 35 mm.

REONPACK TGA024 | from -100°C to 280°C | for pH 3-12

Max. recommended pressure: rotary 30 bar / reciprocating 100 bar / static 200 bar

Perimeter speed 15 m/sec

REONPACK TGA 024 is a seal knitted in a multi-lane construction from PTFE-graphite yarn, guaranteeing shaft protection, good heat dissipation and reduced frictional resistance.

The corners of REONPACK TGA 024 are reinforced with aramid yarn to increase mechanical resistance over the entire temperature and pressure range.

Colour

Black, corners yellow

Use

REONPACK TGA 024 seals are suitable for rotary and static applications for most chemicals, water, solvents, abrasive media, unstable acids and alkalis. It is recommended for use in wastewater, water treatment, chemical and petrochemical industries.

Dimensions

REONPACK TGA 024 gaskets are produced in round or square cross-sections in a range of sizes from 4 mm to 35 mm.

REONPACK TTA023 | from -100°C to 280°C | for pH 3-12

Max. recommended pressure: rotary 30 bar / reciprocating 100 bar / static 180 bar

Perimeter speed 15 m/sec

REONPACK TTA 023 is a plugging cord knitted with a multi-strand construction made of Teflon yarn, impregnated with Teflon dispersion and impregnated with lubricant to reduce the coefficient of friction.

The corners of REONPACK TTA 023 are reinforced with aramid yarn to increase resistance over the entire temperature and pressure range.

Colour

White, corners yellow

Use

REONPACK TTA 023 is a non-polluting seal with good lubricating and operating properties, suitable for use in rotary and static applications for most chemicals, water, solvents, abrasive media, volatile acids and alkalis.

Dimensions

REONPACK TTA 023 seals are available in round or square cross-sections in a range of sizes from 4 mm to 35 mm.

REONPACK AG004 | from -100°C to 180°C | for pH 4-11

Max. recommended pressure: rotary 20 bar / reciprocating 40 bar / static 60 bar

Peripheral speed 8 m/sec

REONPACK AG 004 is a high quality knitted gasket made of synthetic yarn. The gasket is impregnated with graphite impregnated with oil and coated with graphite flake.

Colour

Black

Use

REONPACK AG 004 is designed for rotary pumps, piston pumps and valves due to its abrasion resistance, very good binding capacity of the priming component, dimensional stability and chemical resistance. Suitable for water, steam, oils, gases in the petrochemical industry, power plants, cement plants, refineries, etc.

Dimensions

REONPACK AG 004 sealing cord is produced in square, round or rectangular cross-sections in a range of dimensions from 4 mm to 35 mm.

REONPACK AT002 | from -100°C to 260°C | for pH 2-12

Max. recommended pressure: rotary 20 bar / reciprocating 80 bar / static 100 bar

Peripheral speed 12 m/sec

REONPACK AT 002 is a high quality knitted gasket made of acrylic fibre impregnated with PTFE solution.

Colour

White

Use

The REONPACK AT 002 seal cord is designed for dynamic and static applications such as rotary pumps, valves, piston rods, spindles, flanges, covers, etc. This gasket is recommended for sealing potable water, steam, gases, most solvents, mildly acidic and alkaline chemicals. The seal does not contain dyes and therefore there is no risk of environmental pollution.

Dimensions

REONPACK AT 002 is produced in square and round cross-sections in a range of dimensions from 4 mm to 35 mm.

REONPACK AT001 | from -50°C to 260°C | for pH 3-11

Max. recommended pressure: rotary 20 bar / reciprocating 40 bar / static 60 bar

Perimeter speed 10 m/sec

REONPACK AT 001 is a high quality gasket knitted with a multi-strand construction of Teflon impregnated graphite infused acrylic fibre to increase heat dissipation and reduce frictional resistance.

Colour

Black

Use

REONPACK AT 001 is suitable for rotary and static applications for sealing water, steam, gas, most solvents, acids and for sealing common chemicals in industry.

Dimensions

The REONPACK AT 001 sealing cord is available in round or square cross-sections in a range of sizes from 4 mm to 35 mm.